Water can cause a lot of damage to residential or commercial property. It can ruin your prized possession and lead to poor indoor air quality that can cause a respiratory problem like asthma.
But, it doesn’t have to be this way.
If you can act fast, you will minimize the damage and save some of your things. Preventing mildew and mold growth is the key to keeping your home or office healthy and clean. Or you can always call for help water damage restoration Houston company that will fix any problem easy and fast.
Here are six easy tips that will help you clean your house after water damage.
Available 365 days a year, 24 hours a day
1 Take care of your electronic devices
When the disaster happens, the main thing you want to do is to remove all your possessions in the dry area. The faster you do it, the more likely you will be able to save most of them. Move your electrical appliances and lamps from the affected area.
Turn off the power that leads to the flooded room, especially if moisture rises to the electrical outlets. Remove the underpadding and carpets and let them dry out. You will save the carpet if you immediately disinfect and clean it, but if it is already wet, the chances are it will probably shrink.
But, you can use it as a rug after it dries. As for the underpadding, if you don't remove it immediately, it will absorb a lot of water.
2Remove the water
You could get rid of the moisture in few ways. First, try with the old-fashioned, manual way using mops, towels, and buckets to soak up as much water as possible. Pour the water down the sewer, or onto your lawn. You can also use a dry/wet vacuum, but you need to be very careful with it.
Plug it into the outlets who are far away from any moisture. It would be wise not to use an extension cord because it can short out and give you an electric shock. Remember that water and electricity don’t go together!
You could also rent a sump pump from hardware shops or a local Rent-all store. Drying out the wet area and getting rid of all the water is the crucial thing to do, to prevent any additional damage.
3Dry out the wet area
Once you removed all the water, use dehumidifier and fans to dry out the affected area as soon as possible. If you have windows in the room that was flooded, open them and doors to allow the air to flow through your home or office so it can dry faster. Don’t forget; the most important thing is to act quickly.
4Disinfect the room
Make sure that area is died out completely, including drywall, insulation and wood beams. The next step is to clean all areas that were flooded including non-upholstered furniture, walls, and wood. Using a good disinfectant, you will get rid of the bacteria that might have come up through toilets or sewers.
5Prevent any new bacteria and mold growth
After you have dried out the wet area, the next step is to use mold-resistant products. It will help you to prevent the bacteria growth and to control it. Be careful when you are applying these products.
According to HGTV, "Treating areas of existing mold growth should always be done while wearing a respirator or mask rated for work with mold spores, and arms, legs, and hands should be covered to prevent an allergic reaction. After removing any moldy debris such as sub-flooring or drywall, hard surfaces can be treated with commercial mold control products containing bleach or ammonia, which can help to eradicate any surviving mold."
6Responsibly throw away the damaged items
Try to find any recycling centers in your neighborhood so that you can get rid of the adhesives, stains old paints, or damaged electronics. Don’t throw it away into a dumpster.
With these right steps and a fast action, you can minimize the water damage and save some of your important stuff. Cleaning up your property and preventing mildew and mold growth will keep your house and office healthy.